§ 34-51. Requirements for solid waste containers for residential use.  


Latest version.
  • (a)

    All solid waste placed for storage or pickup outside any residence in the town shall be placed in durable metal or plastic containers with tight-fitting covers.

    (b)

    Such containers shall be sufficient in number to accommodate the accumulation of waste between collections.

    (c)

    Such containers shall be of sturdy construction throughout and shall be made of corrosion-resistant metal or plastic. They shall be watertight and have strong handles. Tight-fitting covers shall be kept on refuse containers at all times except when filling or emptying.

    (d)

    Such containers shall be maintained in good condition so that they do not have ragged or sharp edges or any other defect liable to hamper or injure the person collecting the contents.

    (e)

    Any container that does not conform to the provisions of this section shall be promptly replaced by a proper container upon receipt of notice to that effect from the town manager or his designated representative. Failure to replace such non-conforming or defective container shall subject the property owner to the penalty set forth in this section.

    (f)

    A violation of the provisions of this section shall subject the offender to a civil penalty in the amount of $50.00 to be recovered by the town in a civil action in the nature of a debt if the offender does not pay the penalty within ten business days after he has been cited for violation of this section. Each day's continuing violation shall be a separate and distinct offense.

(Code 2003, § 14-66; Ord. No. 09-28, § 1(exh. A), 12-17-2009)